The same clause of the standard specifies the meaning of the other bit values within the Actor_State field in case you need to determine the meaning of those as well. On Cisco switches this is configured under the physical interface with the lacp rate command. In the standard the 1-second interval is called the Short Timeout and the 30-second interval is called the Long timeout. This information is specified within the IEEE 802.1AX standard (previously IEEE 802.3ad) in clause 5.4.2.2 as part of the Actor_State field. dec to hex 0圎B hex 0d236 dec to hex 0圎C hex 0d237 dec to hex 0圎D hex. ![]() In your example the partner connected via port-channel 12 with a port state of 0x3F is requesting the LACP PDU be sent at 1-second intervals, and the partner connected via port-channel 14 with a port state of 0x3D is requesting the LACP PDU be sent at 30-second intervals. Convert 0d228 decimal to hexadecimal, dec to hex unit converter with. The difference between 0x3D and 0x3F is the rate of the Link Aggregation Control Protocol (LACP) Protocol Data Unit (PDU). The 0圎D hex editor was used to make this hack.I found your post while trying to find this information for myself, and as I've now found the answer and this post comes near the top of an Internet search, I thought I'd put the answer here.
0 Comments
Leave a Reply. |